Building tool
Paver Calculator
Estimate pavers, base material, bedding sand, edge length, and waste for a patio.
Runs in your browserResult
- Patio area
- 280 sq ft
- Pavers with waste
- 1,386
- Base material
- 3.46 yd³
- Bedding sand
- 0.86 yd³
- Edge restraint
- 68 ft
Actual joint width, pattern, cuts, compaction, soil, drainage, and product dimensions affect the order.
How to use this paver calculator
- Measure the project, enter the dimensions in the units shown, and add the waste, spacing, coverage, or material settings that apply.
- Review the calculated totals, units, and assumptions. Check the inputs and units before relying on the result.
- Change one input at a time to compare another case, then copy or save the result you plan to use.
About this paver calculator
Use the Paver Calculator to estimate pavers, base material, bedding sand, edge length, and waste for a patio. Change the inputs to compare another result.
You can also use it to compare results after changing one input.
Example
Measure a 12-by-10-foot surface, enter the paver dimensions, and add a waste allowance for cuts and breakage.
Common uses
- → estimate pavers, base material, bedding sand, edge length, and waste for a patio
- → compare results after changing one input
- → save an estimate for planning or comparison